Energy Save Automatic High Temperature Desiccant Dehumidifier, Dehumidifying Machine

Pls note: Votage,Plug,Product words,LOGO,Packing etc can changed as per buyer's requirement.

save energy dehumidifier

1.application scope

The Parkoo brand dessicant dehumidifier is developed by the company on the basis of more than 10 years of frozen dehumidifier design, manufacturing experience which the dehumidification equipment can be used in low temperature environments, due to the temperature of the refrigerant dehumidifier Scope is 18-38 degrees, in a low temperature environment dehumidification capacity dropped significantly, even frosting dehumidification phenomenon, minimum humidity RH30% no longer decline, can not be applied to the environment of low temperature low temperature requirements.dessicant dehumidifier to solve the industry problems, and expand the field of application of the dehumidifier is widely used in cold storage, pharmaceutical, lithium batteries, film workshop, glass aggregate films such places, also play an important role in the food, dried seafood applications .

2.dessicant dehumidifier work principle

Dehumidifier main parts is the honeycomb  rotary wheel, it is made of heat-resistant material,special composite corrugated medium,corrugated medium containing hygroscopic agent.
      On both sides of the desiccant wheel, a separator made of an elastic material of high sealing performance is divided into two sectors: one for handling wet air 270 °sector of the end of the region, another for the the reconditioning air side of the 90 °fan-shaped area, when pending the humid air into the runner 270 ° fan-shaped area,the air in the water molecules within the runner hygroscopic agent absorption, dry air at the outlet of dried air supplied through the processing fan. Wheel rotation speed of 8 to 10 weeks / hours. Dealing with the fan of the air district to absorb water molecules become saturated, will automatically go to the end of the fan-shaped area of regeneration air into the regeneration process.
      In the regeneration process, the regeneration air after heating (120 ° C or so), into the regeneration zone of runner fan in the high temperature state, the water molecules in the runner are desorbed, and lost to the regeneration air. Regeneration air due to the heat loss in the desorption process, the reduction in its temperature, into a large moisture content of the humid air, discharged to the outside by the regenerative blower. Dehumidification and regeneration simultaneously, the pending air constantlydehumidification wheel constantly renewable, continuous dehumidification of the air.

Applications:

The Parkoo electric Appliance recommends the use of the portable desiccant dehumidifier in the following situations:

Humidity of less than 35%RH
Low dew point conditions
Low temperatures, especially combined with low humidity
Single pass air flow applications

Pharmaceutical production, packaging, storage, testing and research
Process air systems
Photographic/film archive stores
Pneumatic conveying of powders
Pumping stations
Confectionary production and packing
Food production
Clean rooms
Electronics manufacture
Cold stores
Seed storage
Drying & corrosion prevention inside power station turbines
Injection moulding machines
Tank drying

Features

1.Accurate camputer contral system

2.Timer function

3.Proflute Rotor, imported from Sweeden, washable

4.Delaytime protection circuit

5.Silence, economical, saving, and easy operation

6.Fault locator system

7.Cleanable air filters helps improve the quality of air being circulated through the system at the processing air entrance&reactivation air entrance

Principle of desiccant dehumidifier

The core part of desiccant dehumidifieris cellular structure desiccant rotor, formed by special ceramic fiber composite and silica gel. The rotor is divided into two areas by a seal device, one is process area(dehumidification area), the other is reactivation area. When the dehumidifier is in operation, two streams of air pass through two areas simultaneously. One is the air that will be dehumidified by silica gel in rotor, the other is hot air used to dry the running rotor so that it will be able to remove moisture again. The moisture is taken away by the hot and very humid air steam.

As per the below picture showing:

Others:

 Ms. Lisa Gong
Manager
Tel: 86-20-62752125
Fax: 86-20-62752562
Mobile: 86- 158 1581 5806

Contact to this supplier